Indesit ICD Washer User Manual


 
18
How to Drain Excess Water From Hoses
If the sink is 1000 mm higher from the floor, the excess water in hoses cannot be drained directly into the sink. It will be
necessary to drain excess water from hoses into a bowl or suitable container that is held outside and lower than the sink.
Water Outlet
Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks. Ensure that the water drain hose is
not kinked or squashed.
Extension Hose
If you need a drain hose extension, observe to use a similar drain hose.
It must be no longer than 4 meters; otherwise the cleaning effect of the dishwasher could be reduced.
Start of dishwasher
The following things should be checked before starting the dishwasher.
The dishwasher is level and fixed properly
The inlet valve is open
There is a leakage at the connections of the conducts
The wires are tightly connected
The power is switched on
The inlet and drain hoses are knotted
All packing materials and printings should be taken out from the dishwasher
Attention:
After installation, please make sure to keep this manual.
The content of this manual is very helpful to the users.