Filter
Top Products
11
6. Starting a washing programme
Wash Cycle Table
NOTE:
(
) Means: need to fill rinse into the Rinse-Aid Dispenser.
*En 50242: This program is the test cycle, the rinse-aid dispenser
setting is recommended to Position 6.
Program Cycle Selection Information
Description
of Cycle
Detergent
Running
time (min)
Energy
(Kwh)
Water
(l)
Rinse
Aid
For the heaviest soiled loads,
such as pots, pans, casserole
dishes and dishes that have
been sitting with dried food on
them for a while.
Pre-wash(50°C)
Wash (70°C)
Rinse
Rinse
Rinse (70°C)
Drying
3/15g
(or 3 in 1)
145 0.94 11.0
★
For normally soiled loads,
such as pots、plates、
glasses and lightly soiled
pans.
Pre-wash
Wash (60°C)
Rinse
Rinse (70°C)
Drying
3/15g
(or 3 in 1)
125 0.70 8.4
★
Standard daily cycle for
normally soiled loads,
such as pots、plates、
glasses.
Pre-wash
Wash (55°C)
Rinse
Rinse (70°C)
Drying
3/15g
(or 3 in 1)
170 0.6 8.
★
For lightly soiled loads, such as
glasses, crystal and fine china.
Wash(45°C)
Rinse
Rinse(60°C)
Drying
15 g. 75 0.48 6.8
★
A shorter wash for lightly soiled
loads that do not need drying.
Wash (40°C)
Rinse
Rinse
15 g. 30 0.30 6.0
To rinse dishes that you plan to
wash later that day.
Pre-wash
14 0. 01 2.1
Turning On the Appliance
Starting a wash cycle...
Draw out the basket (see the section entitled "Loading the Dishwasher").
Pour in the detergent (see the section entitled "Salt, Detergent and Rinse Aid").
Insert the plug into the socket. The power supply is 220-240 VAC 50 Hz, the
specification of the socket is 10 A 2 50 VAC. Make sure that the water supply
is turned on to full pressure.
Rotate the knob, the wash program will be changed as follows direction
Then press the Start/Pause button, the dish washer begins to start.
NOTE:
When you press the Start/Pause button to pause during washing, the
pro gram light will stop blinking and the dishwasher will mooing every
minute unless you press the Start/Pause button to start.
5 5