Hotpoint WT 400 Washer User Manual


 
6
GB
Washing machine description
Detergent dispenser: to add detergent and
fabric softener (see page 10).
LEDS: to find out which wash cycle phase is under way.
If the Time Delay function has been set, the time
left until the programme starts will be indicated
(see page 7).
FUNCTION buttons: to select the functions
available. The button corresponding to the
function selected will remain on.
VARIABLE SPIN SPEED knob: to set the spin speed
or exclude the spin cycle completely (see page 9).
VARIABLE TEMPERATURE knob: to set the tem-
perature or the cold wash cycle (see page 9).
ON/OFF button: to turn the washing machine on
and off.
START/RESET button: to start the programmes
or cancel any incorrect settings.
DOOR LOCKED Led: to find out whether the
washing machine is on and if the appliance door
can be opened (see page 6).
WASH PROGRAMME knob: to select the wash
programmes (see page 8). The retractable control
knob: press the centre of the knob for it to pop
out. The knob stays still during the cycle.
Control panel
LEDs
FUNCTION
buttons
ON/OFF
button
START/RESET
button
DOOR LOCKED
LED
VARIABLE
TEMPERATURE
Knob
WASH
PROGRAMME
Knob
VARIABLE
SPIN SPEED
Knob
LID DOOR LOCKED led:
If this LED is on, the appliance lid door is locked to prevent it from being opened accidentally; to avoid any
damages, wait for the LED to flash before you open the appliance door.
The rapid flashing of the LID DOOR LOCKED Led together with the flashing of at least one other LED
indicates there is an abnormality. Call for Technical Assistance.