Filter
Top Products
●
Please retain all
packaging components
as they must be replaced
if the machine is to be
transported in the
future.
●
Your machine was
inspected before
leaving the factory.
You may therefore find
traces of water in the
tub or in the detergent
compartment.
Remember you may be
charged for a service
call if a problem with
your appliance is
caused by incorrect
installation or misuse.
2. Remove Transit Bolts...
BEFORE ATTEMPTING TO USE THE MACHINE,YOU MUST FOLLOW THE PROCEDURE DESCRIBED BELOW.
These operations involve removing four transit fixing bolts that immobilise the tub of your machine
during transportation.
These “unpacking”operations are compulsory for safety reasons.
6
1.
Remove ALLfour transit fixing bolts
(A) using a 10mm spanner. Unscrew
until three threads can be seen.
3.
When all four transit fixing bolts have
been removed,blank off the holes
left using the plastic covers provided
(B).
2.
Hold the end of the bolt and pull,
firmly but carefully.
Ensure each transit fixing bolt is
removed complete with spacer.
1
2
Example transit fixing bolt
complete with spacer.
3. Levelling...
To guarantee correct functioning the appliance must be standing firm and level.
The four feet can be turned to level the appliance. Ensuring your machine is
level will help prevent vibration and risk of damage to the appliance.
4. Moving the Appliance...using the wheels.
If your appliance is fitted with folding castor's, it is easy to
move.To extend the wheels, move the lever at the bottom
of the machine from left to right.
Do not forget to return the lever to its original position.
The machine should not be used while standing on its
two ‘front’ castor's.