Hotpoint WMTL80 Washer/Dryer User Manual


 
Follow these 5 steps for a trouble free installation:
1. Choose a Location...
2. Remove Transit Bolts...
3. Levelling...
4. Moving the Appliance...
5. Connect to the Water Supply...
6. Connect to a Drainage System...
Installation Instructions
IMPORTANT INFORMATION:
Do not plug in and switch appliance on at the mains until installation is complete.
You may be charged for a service call if a problem with your appliance is caused
by incorrect installation or misuse.
5
The choice of location for your appliance will influence its performance.
Position where possible on a solid floor.Vibration may occur with a wooden floor.
Take care with vinyl floor coverings.The weight of the appliance may cause indentations in
some vinyl floor coverings.
You should not install your appliance on a carpeted floor,but if this is unavoidable,ensure
that air can circulate around its base.
If locating next to another appliance or an item of furniture,leave space between them to
allow air to circulate.
For your safety and to comply with IEE regulations,you should not install your appliance in a
bath or shower room.Seek professional advice if you wish to do so.
Ensure sufficient space is allowed for the appliance - minimum requirement for dimensions
(H) 850mm x (W) 400mm x (D) 600mm
Ensure the electrical socket and water taps are easily accessible and that the water
supply can be isolated if necessary.
1. Choose a Location...