Filter
Top Products
22
Options
PROGRAMMES
AND OPTIONS
Pre Wash
● This option provides a short wash cycle, at 30˚, before the selected wash
programme starts. It is used to loosen the heavy soil deposits on clothes.
It is recommended that detergent is also used in the Prewash compartment.
To use this option press the ‘Pre-Wash’ option button once and illuminates in the
display window above the ‘Pre-Wash’ option button.
Press again to cancel the option.
This option is not available with the Super Wash, Wool, Handwash, Fast Wash
and the Rinse and Spin programmes.
Mini Load
● Select this option for washing a smaller load.
In addition to reducing actual washing time, this option will reduce the water
and energy consumption by up to 50%.
To use this option, press the ‘Mini Load’ option button once and illuminates in
the display window above the ‘Mini Load’ option button.
Press again to cancel the option.
Note: You can reduce the amount of detergent you use with this wash.
This option is not available with Super Wash, Wool, Silk or Handwash
programmes.
Reduce Creases
● This option reduces the wash action and spin speed for delicate clothes.
To use this option press the ‘Reduce Creases’ option button once and illuminates
in the display window above the ‘Reduce Creases’ option button.
Press again to cancel the option.
This option is not available with Super Wash, 95˚ Cotton, 30˚ Fast Wash, Wool,
Silk, Handwash and Spin Only programmes.
Pre Wash
Mini Load
Reduce Creases
Automatic Features
Auto half load
Auto half load saves you time and money when washing smaller loads. Water levels are
automatically adjusted to cater for the different loads.
Unbalanced load warning
Your machine has an inbuilt feature to prevent it spinning with an unbalanced load. This will
minimise excessive vibration and prolong the life of the machine.
Before each spin the machine ‘senses’ the load within the drum and if the machine considers the
load to be unbalanced, it will not
automatically spin. Instead the machine will try to redistribute
the load to achieve balance by tumbling backwards and forwards. If it is unable to balance the
load after the sixth attempt the machine will abort the spin process.
If this safety feature is encountered you can spin the load, after first opening the door,
redistributing the load and reselecting a fast or slow spin programme. In the case of small loads
or single items you may try adding some extra items of a comparable size to help balance the
load.