Hotpoint WD71 Washer/Dryer User Manual


 
11
Select optional wash &
dry features (pages 15 -
16), you will hear a beep
and the Infobubble™ will
display the selection.
Switch ‘ON’, a coloured
band indicates selection.
The Infobubble™ will
display ’Select
Programme’
Independent Dry Programme
IMPORTANT INFORMATION: Before selecting an independent drying
programme, ensure the mains button is in the ‘OFF’ position.
Remove wet laundry
and dosing ball (if used)
until the correct ‘Drying
Weight Load’ (page 14)
is left in the drum.
Close door by applying
pressure at the
2 o’clock position.
2
3
WARNINGS
If your appliance is not
permanently plumbed
in, turn on the cold
water supply to the
appliance and hook the
drain hose over the
sink to enable the
condensing action to
work.
The dryer is intended
for use only where
water is used for the
cleaning process.
Be careful not to touch
the drum at the top as
this area gets hot
during drying.
On no account should
liquid fabric conditioner
be added during the
drying process.
Misuse of the dryer may
create a fire hazard.
Press ‘START’, the door
will lock and the
symbol will appear in the
Infobubble™ throughout
the wash & dry
programme.
1-2 minutes after
completion of the wash
programme the
symbol will disappear
and the door can be
opened. Switch ‘OFF’
after use.
56
4
1