Filter
Top Products
7
Wash Labels
Explained
Contents Description
Programmes and
Option Modifiers Troubleshooting
Safety
Advice
Technical
Details Service
GB
Programmes and
Option Modifiers
Option modifiers
Selecting options and their function
●
Prewash:
Use Prewash to loosen heavy soil deposits on laundry. Selecting this option will run a short 30˚ wash cycle
before the selected main wash programme. Add detergent to both the prewash and main wash compartments
of the dispenser drawer.
To select press the Prewash option button and the option light will illuminate on the LCD display above the
button.
Press the button for again to cancel, the option light will go out.
●
How Dirty:
Use this option to modify your programme according to the degree of soiling on the laundry to be washed.
You can select either ‘Light’, ‘Normal’ or ‘Super’.
This option is set automatically to ‘Normal’, this will be illuminated on the LCD display.
- Each press of the ‘How Dirty’ option button will scroll through the three options. The new selection will be
shown on the display.
●
Stored Programme:
Use this option to store your favourite programme. Only one programme can be stored.
- To store a programme:
Load your machine and add detergent to the dispenser drawer. Select the programme and any
options required. Press the START/CANCEL button and the programme will start. Then press the
‘Stored’ option button twice and that programme will be stored for future use. ‘Saving Favourite’ will
illuminate on the LCD display for 2 seconds after the programme settings have been stored.
- To retrieve and use a stored programme:
Load your machine and add detergent to the dispenser drawer. Press the ‘Stored’ option button, your
favourite programme settings will appear on the LCD display. Press the START/CANCEL button to start
the programme.
- To change a stored programme:
Load your machine and add detergent to the dispenser drawer. Press the ‘Stored’ option button, your
favourite programme settings appear on the LCD display. Select the programme and option selections
for you new requirements, then press the START/CANCEL button to start the programme. Press the
‘Stored’ option button again and the new settings will replace the old. ‘Saving Favourite will illuminate
on the LCD display for 2 seconds after the programme settings have been stored.
●
Child Lock:
Select this option to disable all buttons so no programme and option selections can be altered.
Press the Child Lock option button and the option light will illuminate on the LCD display above the button.
Once Child Lock is selected it remains activated even when the machine is switched off. If power is interrupted
at any time pressing any button will reactivate the Child Lock feature. If Child Lock is activated and any
control buttons are pressed the option light will flash: no alterations to the settings will be allowed.
Press and hold the Child Lock option button for 2 seconds to cancel, the option light will go out.