Filter
Top Products
9
F
SPIN SPEED button
The spin cycle is very important to remove as much water as possible from the laundry without
damaging the fabrics. You can adjust the spin speed of the machine to suit your needs.
By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle
can be cancelled. To reactivate the spin cycle press the button until you reach the spin speed you
would like to set. To prevent damage to the fabrics, it is not possible to increase the speed over
that which is automatically suitable during the selection of the program.
It is possible to modify the spin speed without to pausing the machine.
Note:
The machine is fitted with a special electronic device, which prevents the
spin cycle should the load be unbalanced.
This reduces the noise and vibration in the machine and so prolongs the life
of your machine.
H
SENSITIVE CARE button
By pressing this button you can activate a special new wash cycle in the Cotton and Mixed
Fabrics programs, thanks to the new Sensor System. This option treats with care the fibres of
garments and the delicate skin of those who wear them. The load is washed in a much larger
quantity of water and this, together with the new combined action of the drum rotation cycles,
where water is filled and emptied, will give you garments which have been cleaned and rinsed to
perfection. The amount of water in the wash is increased so that the detergent dissolves perfectly,
ensuring an efficient cleaning action. The amount of water is also increased during the rinse
procedure so as to remove all traces of detergent from the fibres. This function has been
specifically designed for people with delicate and sensitive skin, for whom even a very small
amount of detergent can cause irritation or allergy. You are advised to also use this function for
children’s clothing and for delicate fabrics in general, or when washing garments made of towelling,
where the fibres tend to absorb a greater quantity of detergent. To ensure the best performance for
your wash, this function is always activated on the Delicates and Woollens programs.
G
“FAST IRON” button
The Fast Iron function (Not available on COTTON programmes) minimizes creases as much
as possible with a uniquely designed anti-crease system that is tailored to specific fabrics.
MIXED FABRICS - the water is gradually cooled throughout the final two rinses with no
spinning and then a delicate spin assures the maximum relaxation of the fabrics.
DELICATE FABRICS – final two rinses with no spinning and then the fabrics are left in
water until it is time to unload. When you are ready to unload, press the "Fast Iron" button –
this will drain.
WOLLENS/SILK – after the final rinse the fabrics are left in water until it is time to unload
and the button indicator blinking.
When you are ready to unload, press the "Fast Iron" button, this will drain and spin ready for emptying.
If you do not want to spin the clothes and activate drain only:
- Turn the programme selector to the "OFF" position;
- Select programme drain only ;
- Switch on the appliance again by pressing the "Start/Pause" button.