Filter
Top Products
3WPL073501-1
8
9
Control Panel and Display
Water temperature
The symbol is on when the heater is off (Cold setting).
Spin speed
●
‘0 r/min’ (No Spin) : Final spin is cancelled and last rinse water is
drained only.
●
‘- - -’ (Rinse Hold) : Final spin is cancelled and water is not drained,
so the laundry remains in the last rinse water.
QUICK option
INTENSIVE option
PREWASH option
EXTRA RINSE option
Progress indicator
Shows which phase of the program is performing.
The following symbols blink when each phase is running, and go off
when each phase is completed.
PREWASH
Main Wash
Rinse
SPIN
Child lock option
All buttons are disabled except the POWER button and Jog Dial, and
the door is locked when the
symbol is on.
Door lock
The door is locked when the
symbol is on.
TIMER option
Remaining time of the program (shows ‘TIME LEFT’), remaining time
until timer operation is completed (shows ‘HR’), and error codes.
ÆPage 21 : Error Codes
Before You Start Washing
Control Panel and Display
■
Remove any foreign objects (coins, safety pins, etc.).
■
Use a washing net when you wash delicate clothes (knit products,
lingerie, etc.).
■
Close zips, brush sand out of pockets and collars.
■
Brush pet hair out of laundries.
■
Sort the laundry according to the type of fabric and care label symbol
(cottons, mixed bers, synthetics, wool, hand wash, etc.).
■
Do not wash too small an amount of laundry such as only a pair of jeans.
ÆThis may result in insufcient spin performance.
■
Separate colored and white items.
Risk of injury!
Washing the following items may cause injury or malfunction due to
abnormal vibration :
- Waterproof items such as a wet suit, ski suit, etc.
- Anti-slip treated items with rubber bottoms such as a doormat.
- Cushions, pillows, shoes, etc.
Preparation of
the washing
Sorting the
laundry
The following indications are displayed when washing time is prolonged
due to :
HR
TIME
LEFT
r/min
C
o
●
Excessive foam in the drum.
ÆPouring in extra water to remove excessive foam.
EXTRA RINSE option pictogram lights
up, and three horizontal bars light up in
order.
●
Imbalance in the drum.
ÆCorrecting imbalance by rotating the drum.
Bars rotate clockwise.
*This is not a malfunction. Remaining time may be turned back when
these indications are displayed so that operation is completed in a
longer time than the remaining time displayed at the start.
Lets you program a wash to nish up to 24 hours later. The symbol is
shown on the display.
Child lock: To prevent accidental operation by children, this disables the
operation buttons and dial, and also locks the door. Press the TIMER
button for 3 seconds to activate this option. The
symbol is shown on
the display. Press TIMER button for 3 seconds again to cancel the child
lock. (Remaining time of timer operation is shown instantaneously but
disappears after the child lock is set.)
Displays all cycle information, remaining time and error codes.