Filter
Top Products
3WPL073501-1
26
27
How to Install the Washing Machine
How to Install the Washing Machine
■
You need a space of 600 mm (W) x 600 mm (D) x 850 mm (H) with at
least 3 mm of clearance on the sides, above and back.
■
If the height of the space ranges from 823 mm to 852 mm, remove the
worktop and install an upper plate on top of the washing machine (sold
separately).
Upper Plate :
Part No. BD-W80MV 150
Please contact your local dealer when
installing the upper plate.
Necessary clearance :
(Sides) At least 3 mm
(Back) At least 3 mm
(Above) At least 3 mm
■
For neater installation under the counter, check the height of internal
measurement before tting and adjust to the appropriate height with the
adjustable feet.
ÆPage 26 : How to Install the Washing Machine (Level Adjustment).
Under-counter
installation
■
Connect the washing machine to an alternating current via a correctly
installed earthed socket only.
■
The mains voltage must correspond to the voltage specication on the
washing machine.
■
Connection specications as well as the required fuses are stipulated
on the washing machine nameplate.
■
Do not plug the washing machine into an extension lead or power strip
with multiple sockets.
■
All four adjustable feet must be rmly on the ground. The washing
machine must not wobble.
■
Check the alignment of the washing machine with a spirit level, and
adjust the feet if it’s not aligned.
Loosening 1
Adjustable leg
Elevating
Lock nut
Loosen the lock nut by
unscrewing in the arrow
direction
1 then stabilize
the unit with the adjustable
feet.
Lock nut
Tightening
2
After adjustment, tighten
the lock nut by screwing it
in the arrow direction
2.
Plastic base plate
Tighten the lock nut until it
reaches the plastic base plate.
Adjustable leg is not over 25 mm.