Filter
Top Products
SKU 66738 For technical questions, please call 1-800-444-3353. Page 4
ing, contact Harbor Freight Tools for a
replacement.
Place securely on Iron Holder (6) 2.
when not in use.
Keep away from ammable objects. 3.
Do not overheat adhesive. 4.
When using a handheld tool, maintain 5.
a rm, controlling grip on the tool.
Do not leave the tool unattended 6.
when it is plugged into an electrical
outlet. Unplug the tool from its elec-
trical outlet and allow to cool down
before leaving.
This product is not a toy. Keep it out 7.
of reach of children.
Any power cord must be properly 8.
grounded. Ground Fault Circuit Inter-
rupter (GFCI) should also be imple-
mented – it prevents sustained elec-
trical shock.
WARNING: Handling the cord on 9.
this product will expose you to lead,
a chemical known to the State of
California to cause cancer, and birth
defects or other reproductive harm.
Wash hands after handling.
(California Health & Safety Code §
25249.5, et seq.)
The warnings, precautions, and in-10.
structions discussed in this instruction
manual cannot cover all possible con-
ditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SAVE THESE
INSTRUCTIONS.
GROUNDING
TO PREVENT
ELECTRIC SHOCK
AND DEATH FROM
INCORRECT GROUNDING
WIRE CONNECTION:
Check with a qualied
electrician if you are in doubt
as to whether the outlet is
properly grounded. Do not
modify the power cord plug
provided with the tool. Never
remove the grounding prong
from the plug. Do not use the
tool if the power cord or plug
is damaged. If damaged, have
it repaired by a qualied
service technician before use.
If the plug will not t the
outlet, have a proper outlet
installed by a qualied
electrician.
Grounded Tools: Tools with Three
Prong Plugs
Tools marked with “Grounding Re-1.
quired” have a three wire cord and
three prong grounding plug. The
plug must be connected to a properly