Haier XQJ100-96 Washer User Manual


 
1Preparation before washing
Preparation before washing
1.Connect the water inlet hose. Open the water
faucet.
2.Confirm that the washing machine is earthed
reliably. Then insert the power plug into the
receptacle. The earth terminal shall not link to
gas pipeline and faucet water pipeline.
3.Put the drain hose up to suitable position.
Confirm if there has special requirement for the laundries.
The quantity of the laundries shall not exceed the rated value. The big laundries like jeans
shall be put in loosely.
Close zippers, snaps, and hooks to avoid snagging other items. Remove pins, buckles,
and other hard objects to avoid scratching the washer interior. Remove non-washable
trim and ornaments
Empty pockets and turn them inside out.
Turn down cuffs, brush away lint and dirt.
Tie strings and sashes so they will not tangle.
Mend tears, loose herms, and seams.
Treat spots and stains.
Stained or wet garments should be washed promptly for best results.
Separate heavily soiled items from lightly soiled ones, even if they would normally be
washed together.
Separate lint givers(towels, chenille) from lint takers(corduroy, synthetics, permanent
press). When possible, turn lint givers inside out.
Separate dark colors from light colors, colorfast items from non-colorfast items.
Sort by fabric and construction(sturdy cottons, knits, delicate items).
Note: "H" is the height of
the hanged drain hose.
Pay attention to followings before washing the laundries