Haier XQG50-11 Washer User Manual


 
Power Button:
Push the button in to have your washer "ON". The light will turn on
indicating that power is "ON". Push the button out to have your washer
"OFF". The light will go off indicating that power is "OFF".
Spin Cycle Selector Button:
If you want to extract more water from your clothes during the wash
cycle, leave the button in the out position. Clothes will be drier when this
option is selected.
If you do not want to extract water from your clothes using the spin
cycle, push the button in. If this option is selected, only the excess water
in the tub will drain leaving the clothes wet. The "No Spin" button when
pushed in will not activate the spin cycle.
Advantages of No-Spin Cycle:
• The spin cycle may cause excessive creasing and wrinkling in some fabrics.
High speed spin might be too strong for delicate garments. It could result in
stretching or excessive wear.
Note: When the No Spin is pressed in, the machine will not automatically go to
the spin dry function.
Water Saver:
• To activate this option press in the "Water Saver" button. If you are washing a
small or a medium load you may want to use this option. This will reduce the
water in the rinse cycle.
7
English
"Front Load" Washer
This style of washing is gentle on your laundry because it has a tumble wash action.
Here there is no agitator to damage your clothes. Since there is no agitator in this
style of washer, the washer runs quietly. This style of washer saves you money as it
uses less water and detergent to clean your laundry.
OPERATIONS
ON/OFF
NO
SPIN
XQG50-11 Manual 10/29/02 1:51 PM Page 9