Haier XQG50-11 Washer User Manual


 
Cotton Cycle:
Pre-Wash Cycle: The purpose of this cycle is that if you want to pre-wash heavily
soiled clothes before the actual wash cycle begins. This cycle is configured in such a
manner that it will go through Intense Normal Delicate wash cycles time
mode and then the rinse and spin cycles automatically to complete the wash. The
total time for this cycle is approximately 147 minutes when selected.
Intense Wash Cycle: This is used for work & play, household linens, heavily
soiled and cotton clothes. This cycle is approximately 120 minutes.
Normal Wash Cycle: This is used for normal to lightly soiled items that needs to
be washed. This cycle is approximately 80 minutes.
Delicate Wash Cycle: This is also used for load of soiled items that needs to be
washed delicately. This cycle is approximately 60 minutes.
Synthetics Cycle:
Intense Wash Cycle: This cycle is used for heavily soiled permanent press, silks,
woolens, nylon and acrylic fabrics. This cycle is approximately 59 minutes.
Normal Wash Cycle: This is used for a small load of lightly soiled items that
needs to be washed. This cycle is approximately 42 minutes.
Delicate Wash Cycle: This cycle is used for loads of soiled items that need to be
washed delicately. This cycle is approximately 33 minutes.
If you set the machine to automatically dry after the wash cycle, the machine will
wash and then dry without interruption. However if you press "No Spin" button
the machine will drain and shut-off after the wash cycle is complete. It will not
spin or advance to the dry cycle.
If you do not set the machine for automatic drying and do not depress the "No
Spin" button after the wash portion of the cycle is complete (at "Soak/Pause"
indication on control panel) the machine will stop. You must either:
A) Drain Only: Prevent spinning by pressing the On/Off switch, advance the
“Cycle Selector Knob” to “Drain” and again press the "On/Off" switch.
B) Drain and Spin: Press the On/Off switch, advance the "Cycle Selector Knob"
to "Spin" and again press the "On/Off" switch.
9
English
XQG50-11 Manual 10/29/02 1:51 PM Page 11