Haier XQB60-91BF Washer User Manual


 
English
Wash Cycle Options:
When you turn the power "ON", the machine will set automatically to "Wash --->
Rinse ---> Spin" program. You can change this setting by pressing "Select Button" to
select other options.
Follow the procedure below when manually selecting wash cycle options:
Soak Option: This is used for heavily soiled or stained clothes. Here the tub fills
with water allowing clothes to soak with periodic water movement. The cycle is
completed when water is extracted by spinning of the drum. This cycle is
approximately 15 to 35 minutes.
Rinse Option: In this cycle, the machine sprays fresh cold water to remove soil
and odor of the detergent from the clothes. The rinse time varies for each cycle.
Spin Option: In this cycle, the water is extracted from the clothes by spinning of
the drum at the end of the cycle, so your clothes are not as damp when taking out
to dry. The spin time varies for each cycle.
Selecting Current Level:
The "Current Level" refers to level of force at which the water is moving through the
clothes. Press the current button to select the proper current level from soft to strong
for selected cycles.
For Normal and Synthetic Cycle, you can select any current level from
"Soft to Strong" position.
For Gentle Cycle, the machine will not let you select any current level.
The current is preset for this cycle and display is not lit during the
cycle.
For Quick Cycle, the current level is preset at second level position and
you will not be able to override the level. The display will be lit to
indicate that.
Warning: In low water level, do not select strong current level in order to avoid
splashing and vibration.
Select Button
(Preset) from the factory
Push one time
Push two times
Push three times
Push four times
Push five times
Cycle Type
For Wash-Rinse-Spin
For Wash only
For Wash-Rinse
For Rinse-Spin
For Spin only
For Soak-Wash-Rinse-Spin
12
XQB60-91BF MANUAL 10/22/01 11:42 AM Page 13