Filter
Top Products
Installation
4
How to change the direction of the drain hose
Figure 1 indicates the ex factory
installation position of the drain hose.
Put a soft cloth on the ground. Lean
the machine down gently with the
front surface facing the ground.
Unhook the drain hose from the
cabinet. Take the hose out of the
fixing groove.(See to Figure 2).
Place the drain hose into the groove
along the side of the spin tub in the
direction of (1)~(3), towards the side
of the spin tub. (See to Figure 3).
Place the drain hose into the
groove by hand. Take care not
to damage the drain hose in
fastening the fixing clamp.
Figure 2
Figure 3
Figure 4
Embed into the
groove in turn
Soft cloth
Extend to the
spin tub side
Take out the drain hose from the fixing groove. Extend it from the
rear as per the direction of the arrow. (When the drain hose
is extended from the rear, it can
be hung on either side of the
cabinet.)(See to Figure 4).
Figure 1
Soft cloth
Back
Front
Extend the drain hose from the side of the spin tub
Extend the drain hose from the rear