Haier XPB60-287S Washer User Manual


 
Ï´ºó´¦Àí
Please first pull out the power plug from the electrical supply
before cleaning.
Figure 2
Figure 3
Figure 1
1. Remove the lint filter
Put hand at the indicated position.
Push down to take it off. ( See
Figure 1)
2. Clean the lint
Put it in water and clean while it is
still wet.(See Figure 2)
filter
3. Install the lint filter
After cleaning, insert the bottom
of the lint filter ( marked with
"down side") into the overflow filter ,
then push the upper part of the
filter in ( marked with " up side ").
(See Figure 3)
The lint filter must be used during washing.
It must be cleaned after each wash.
Cleaning the lint filter
Care and cleaning
10