Filter
Top Products
1. Locate the best place for using your NEW compact portable washer.
Make sure it is near a 120 volt outlet and a water source, like a sink,
with a drain.
2. Screw on the bottom plate with the six (6) screws provided.
3. Connect the water inlet hose, Using the Quick connect fi tting, or directly connect
to faucet.
4. Place drain hose in drain or inside the sink using the Drain Hook.
5. Make sure the lint fi lter is in place, it is installed on the side of the drum.
6. Ensure nothing but clothing is in the washer, then plug power cord into a
15 AMP 110-120 VOLT, 60 HZ GROUNDED OUTLET ONLY.
7. Proceed by pressing the "POWER ON" button.
8. Select water height
9. Select “NORMAL” washing using the “CYCLE” button, then press the
"START" button.
Power
CYCLE
Star t
Pause
NORMAL
Drain
Hook
English English
Quick set-up instructions for normal
wash
SinkFaucet
QuickSink
Faucet
Adapter
SilverFaucet
Connector
Drain
Hook
Low
Manual
WaterLevel
Medium
High
9
FRONT
FACE TO FLOOR