Filter
Top Products
12
3
Wash
Rinse
Spin
For the "Synthetic"and "Memory" cycles the machine will run the Fuzzy
Logic program automatically detecting the type of laundry in the tub. After detection
it will set the water level automatically. The water level can only be changed once
the machine has started, push the "Start/Pause" button, then push the "Water Level"
button to set the water level.
4
Water
Level
Water
Level
Press the button to change the water level
5
Temp
Wash/Rinse
Press the button to select the the wash and rinse temperature
Press the buttons to customise the pre-set options
The cycle indicator lights will go off and the "Delay (Hours) indicator light will be on.
During the delay program, press the "Delay" button to display the time remaining.
The delay time indicator shows the time remaining till the wash ends.
To change or cancel the delay program, switch the power off
and back on, then make a new selection.
Delay start (2-24hr) option
Delay time is the the end of washing
6
Delay
Press the button to select the delay wash program
The delay time program is automatically off. Select the Cycle and options required
and push the "Delay" button
The wash will finish
in about 18 hours
During wool cycle, you can not set the washing time, rinse times and spin time.
You can only use the default settings.
Press the Temp/ Wash/Rinse button to select the the wash
and rinse temperature