Filter
Top Products
15 16
-1
-3
Cleaning the lint filter
The lint filter must be used during
washing.
It must be cleaned in time after each
using.
Take off the lint filter
Put hand at the indicated position.
Push down to take it off.
(See to Figure 1)
Clean the lint
Put it in water and clean while it is still
wet. (See to Figure 2)
Install the lint filter
After cleaning, insert the bottom of
the lint after filter (marked with
"DOWN SIDE") into the filter frame,
then push the upper part of the filter
i n ( m a r k e d w i t h
"UP SIDE").(See Figure 3)
1.
2.
3.
Figure 2
Figure 3
Figure 1
Using Process
Disposal after washing
After using, please clean the lint and foreign materials of the lint filter and lint frame in
time. Otherwise it may influence your using the machine.
Please first pull the power plug from the receptacle before cleaning.
-2
Clean the safeguard cover
The safeguard cover must be used
during washing.
The surface must be cleaned every
time after washing.
The underside of the cover must be
cleaned every period of time.
Take off the safeguard cover
Use the thumb to fasten the indicated
groove then take it out as the direction
of the figure.
Clean the underside of the cover
Use the nipper or other spindly clamps
to take out the lint, sundries etc.
Install the safeguard cover
After finish cleaning, fasten the
safeguard cover to the tub bottom,
infirm the claw install correctly and
hard to fail off.
1.
2.
3.
-1
-2
-3
Groove
Using Process
Disposal after washing