Filter
Top Products
13 14
Using Process
Disposal after washing
Spinning
1.
2.
3.
Put the laundries into the spin tub
evenly and smoothly.
Press the gland in the tub properly.
Close the inner and outer cover of the
spin tub.
Spin
Select suitable spin time according to
the laundries, and do spinning.
During spinning, if there's abnormal
sound, it is generally owing to slanting
placement of the laundries. Please stop
the machine and re-order the laundries.
In spinning, it will pause the work if you
open the outer cover of the spin tub.
Close it to resume the spinning.
Selection of the Spin time list 3.
-1
-2
-3
To do spinning and draining or
rinsing with water-filling
together, please first do spinning
for around 1 minute, then do
draining or rinsing with water-
filling. Otherwise the spinning
will stop owing to too much water
stored in the spin tub.
Note:
Laundries
bed sheet or
blanket
Underwear
(knitwear)
Swear
(chemical fiber)
Blending thin
laundries
Spin time
(minutes)
About 4~5
About 2~4
About 1~2
Within 1
minutes
Using Process
Washing sequence
Cleaning the frame filter
Too much lint on the overflow filter
will influence the normal usage of the
machine. Please clean it every two
months.
Take off the overflow filter
As indicated in the figure, nip the
elastic fixing claw and pull it to the
direction of the arrow to take it off.
Take off the corrugation pipe.
Dismantle the upper inside the
overflow filter (as indicated in
Figure1).
Clean the overflow filter
Clean the lint around the filter and
flush with tap water.
Install the overflow filter
(1) Install the corrugation pipe.
(2) Insert the mounting plate at the
bottom of the filter into original
position.
(3) Hang up the hook at the left upper
side.
(4) Push the upper part in as
indicated in Figure2.)
1.
2.
3.
4.
-1
-2
-3
Hook
Figure 2
Water
1
Pipe
Figure
level
adjusting lever
Elastic fixing
claw
-4
(4)