Filter
Top Products
11 12
Using Process
Washing sequence
1. Put the laundries into the spin
tub evenly and smoothly.
2. Spin :
(1) Put the gland in properly.
Please put in the gland properly
even if the laundries quantity is
small.
(2) Close the inner and outer cover of the
spin tub.
(3) Spin for 1-2 minutes.
Midway spinning
-1
-2
(i)
(ii)
(iii)
WASH
SPIN
Outer cover of
The spin tub
Inner cover of
The spin tub
Push
Push
Proper Proper
The laundries
are slanting
Gland
No gland
3. Run the foam-removing spinning.
Set the water-filling selector control
rad at the "SPIN" side. Fill water for
about 1 minute.
If the water quantity filled is to large,
the water may flow out from the wash
tub side. Please twist the water tap to
limit the water filling.
Close the outer cover of the spin tub.
Spin for 1-2 minutes.
-3
(1)
(2)
(1)
(2)
WASH
SPIN
Using Process
Washing sequence
2.
3.
Fill water to preset water level.
Rinse
Adjust the wash timer to 2-3 minutes to do
rinsing.
When the laundries quantity is below 2-3kg,
please us "STANDARD" current. If you use
"STRONG" current, it may splash.
3.
Rinsing
Rinse with water-filling
1.
2.
3.
Put the laundries into the wash tub. Select
suitable current according to the laundries.
Adjust the water level
Set the water level with water level adjusting
lever according to the laundries quantity.
Then fill suitable water continuously.
Rinse
Adjust the wash timer to 2-3 minutes to do
rinsing.
(Repeat the midway spinning and
rinsing with stored water for 2-3 times)
2.
3.
Rinse with stored water
1.
Put the laundries into the wash tub. Select
suitable current according to the laundries.
1.
2.