Filter
Top Products
15
Using Process
Disposal after washing
16
After washing, dismount the water
inlet hose.
Do not store water in the tub for long
p e r i o d . D i s c h a r g e t h e
water immediately after each
using.
Pull of the power plug and hang up
the power cord.
Hang up the drain hose.
Wipe off the water drops on the
surface and inside the tub with clean
soft cloth.
Open the cover of the wash for some
time (about one hour), then
close them.
Wipe the complete unit with soft
cloth twisted dry.
Wipe with neutral detergent if too
dirty.
Do not wash it directly by water.
Do no wipe with thinner, petrol,
alcohol, etc.
Thinner
Alcohol
Petrol
Disposal of the complete unit
1.
2.
3.
4.
5.
6.
7.
8.
9.
-1
-2
-3
-4
-5
-6
-7
-8
-9
10.
-10
Using Process
Disposal after washing
Cleaning the frame filter
Too much lint on the overflow filter
will influence the normal usage of the
machine. Please clean it every two
months.
Take off the overflow filter
As indicated in the figure, nip the
elastic fixing claw and pull it to the
direction of the arrow to take it off.
Take off the corrugation pipe.
Dismantle the upper inside the
overflow filter (as indicated in
Figure1).
Clean the overflow filter
Clean the lint around the filter and
flush with tap water.
Install the overflow filter
(1) Install the corrugation pipe.
(2) Insert the mounting plate at the
bottom of the filter into original
position.
(3) Hang up the hook at the left upper
side.
(4) Push the upper part in as
indicated in Figure2.)
1.
2.
3.
4.
-1
-2
-3
Hook
Figure 2
Water
1
Pipe
Figure
level
adjusting lever
Elastic fixing
claw
-4
(4)