Filter
Top Products
Maintenance
18
Cleaning and Care
After washing
Turn off the water supply (fig1) and pull out the
electricity plug after each wash (fig2). Open the
washer door to prevent formation of moisture and
odours. If the washing machine is left idle for a long
period, drain the water in the machine and replace
the drain hose.
Fig 1 Fig 2
Cleaning the detergent drawer
Clean the detergent distribution drawer regularly.
Removing detergent drawer
Slide out the draw until the release is visible.
Flush it clean with water and then replace it.
Cleaning the machine
Unplug the machine during cleaning and maintenance. Use a so cloth dampened with soap liquid to
clean the machine case and rubber components. Do not use organic chemicals or corrosive solvents.
Cleaning the filter
Clean the filter once a month:
Open the bottom cover. (fig1)
Pull out the drain tube (about 150mm) (fig2)
remove the plug and allow any water to
drain into a shallow dish. (fig3)
After the draining process is complete, refit
the plug into the hose and refit the hose into
the housing (fig4 & 5).
Remove the filter by turning counter
clockwise (fig6).
Flush the filter clean with running water (fig7).
Replace the filter by turning clockwise and remount the cover (fig8).
The filter must be in place, or it may lead to leakage.
Place a container under the drain pump filter, to collect any excess water that may come out
of the drain pump