Filter
Top Products
Are the laundries slanting
in spinning?
Is there power failure?
The machine does
not act.
Use it when the power is on.
Level the machine properly.
Insert the power plug tightly.
Re-order the laundries.
No wash
No spin
Is the power plug loose?
If water level reach the appoint level?
Affusion to appoint level.
Close the top lid
Is the top lid is not closed.?
Are the laundries put
slantingly?
Phenomenan The reason How to settle
Trouble-shooting
There's abnormal sound
inside the machine.
The water faucet leaks.
Is the drain hose blocked
by foreign material?
Insert the power plug tightly.
Is the power plug loose?
Re-order the laundries.
Close the top lid.
Is the machine slanting?
Is the jointer screw of the
water inlet hose is loose
or twisted awry?
Fasten the jointer screw
properly.
The safety switch acts, and the
spinning cannot work(after twice
automatic imbalance revising). The
digitron displaysE3 and it rings.
The drainage cannotwork, or is too slow.
The digitron displays E1 and it rings.
Afterwashing and rinsing, it stops
running duringspinning. The
digitron displays E2 andit rings.
The top lid is not closed.
Are the laundries put slantingly?
Close the top lid.
Clean the foreign material. Push
the start button again.
Reorder the laundries. Close the top lid.
Set the washing machine horizontally and
then open and close the top lid once.
Is the machine slanting?
The water inlet does not work, or is
too slow (cannot reach the water
level after about 30 minutes). The
digitron displays E4 and it rings.
Is the water faucet opened,
or is there water supply failure?
Is the water inlet valve blocked?
Open the water faucet. Push the
Start/Pause button again.
Clean the water inlet valve then push the
Start/Pause button again.
When you selected the function ofre-s
verve,you opened the cover ,that time
the digitaltube displays E0.
The cascade current is poor or
there's no cascade current.
Is there foreign material blocking
the spray outlet?
Clear the foreign material.
No water inlet.
Isthe powerplug plugged tightly?
Isthe water faucet opened?
Are the POWER ON/OFF and
START/PAUSE buttons pushed down?
Plugthe power plug tightly.
Open thewater faucet.
Push thepower ON/OFF buttonand
START/PAUSE button.
.
In the process of function
of reserve ,opened the cover.
Closing the cover.
The water levelsensor is abnormal
that time the digitaltube displays E6..
.
The terminal of water level
sensor loosing..
Fix the water level sonor
again..
(If there's breakdown, please pull off the power plug before checking) The following phenomena are
not breakdowns sometimes. Please confirm again before sending it to repair. If there are real
breakdowns, please come to the special maintenance department or after-sale service department of
our company. Do not repair it by yourself.