Haier HWM80-68B Washer User Manual


 
Procedure selection method
Times of pushing the
SELECT button
Push the SELECTbutton for 6 times,and it will resume the initial mode. It will circulate in that sequence.
The SOAK procedure can work in cooperation with automatic programs like standardand heavy. There is intermittent
pulsator stirring during soak.
Selected procedure
Applicable circumstance
Contents (the lighted indicators
indicate the programs about to run)
SPIN
(spin after drain)
WASH
(the washing liquid
remains in the tub)
When the common laundries need
washing, rinsing and spinning.
SOAK WASH RINSE SPIN
Repeat using the washing liquid
When the laundries need only
spinning after manual washing (first
drain then spin)
The laundries are very dirty, or the
sleeves and collars of the shirt are
very dirty. First soak then wash.
4 Push the WATER LEVEL button to select suitable water level
Toselect other water level, push the WATER LEVEL button to set the waterlevel.
WATER
LEVEL
WASH - SPIN
RINSE - SPIN
WASH - RINSE
(the rinsing liquid
remains in the tub)
SOAK - SPIN
When prevent the laundries from
corrugating, and the laundries do not
need spinning
SOAK WASH RINSE SPIN
SOAK WASH RINSE SPIN
SOAK WASH RINSE SPIN
SOAK WASH RINSE SPIN
SOAK WASH RINSE SPIN
When the laundries need
0
5
4
3
2
1
5 Push the RESERVE button to select suitable reserve wash program
RESERVE
After the power is switched on, the reserve program is set to off mode automatically. If you need to set the
washing procedure to be finished at reserved time, please push the RESERVE button to set the reserve
wash program. Refer to RESERVE BUTTON in Page 10 for selection.
When the RESERVE function is activated, the indicator of the program you have set will be
off. The RESERVE (HOUR) and TIME REMAIN indicators will be on. During reserve
procedure, you can push the RESERVE button to display the reserve mode.
To change the running program or cancel the reserve setting, you need to switch off the
power and make new selection.
The washing will be finished after 18 hours.
Confirm the operation of reserve program
Reserve time from 2 to 24 hours
6 Push the START/PAUSE button
START
PAUSE
5 Close the top lid
6 Finish washing