Filter
Top Products
Disposal after washing
After using, please clean the lint and foreign materials of the lint filter etc. in time.
Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water completely
after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid
for some time (about 1 hour), then close the top lid.
Clean
The filter screen of the water inlet valve is
likely to be blocked by foreign materials
and influence the water inlet. Please clean
it with brush every two months.
The lint filter must be used during
washing.
It must be cleaned in time after each
using
Lint filter:
1.Pull it up to dismantle.
2.Push it down to install.
3.Clean the filter screen after washing.
Dismantle
Install
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol,
alcohol etc.
Thinner
Pe
tro
l
Alcohol
Dismount Install
Please take off the detergent box and wash it
with water
1.How to take it off: Pull it upwards slantingly
and gently.
2.How to install: Put it in from the top slantingly,
then push it in to the right position.
There may be some water flowing out of the drain
hose in the first use of the machine.
It is the water remained in the machine during the
ex-factory performance inspection.
Common phenomena
Phenomena Explanation
The spinning is intermittent when it starts.
The pulsatorpauses during waterfilling in washing and rinsing.
In addingwater, the pulsator performsstirring slightly
It is to balance the laundries to avoid slanting.
The program is setting the drain time. A certain
period is needed before it starts spinning.
It is to avoid splashing during water filling.
It is to soak the laundries more completely.
Push the SPIN button, but it doesn't act.
Answers to question