Filter
Top Products
Specifi cation
Injection pressure 0.001 MPa —1.0 MPa
Washing / Spinning capacity
7.0kg/7.0kg
Phenomena Explanation
The spinning is intermittent when it starts. Balance the laundries to avoid slanting.
Push the “spin” button to select “Spin”, but it doesn’t
work.
The program is setting the drain time. Some time is
needed before it starts spinning.
There may be some water flowing out of the drain hose
in the first use of the machine.
The wash procedure is paused.
It is the water remained in the factory inspection of
performance.
The cloth sensor is checking the cloth, it will add
water after 48 seconds.
The pulsator pauses during water inlet in wash
and rinse.
It is to avoid splashing during water inlet.
When the power plug is inserted,computer board
indicator is switched on, and the machine starts
working.
It is the special resume function. In the case of power
failure or the power plug is loose during washing, the
machine can save the running program, and resume
the program after the power supply is recovered. You
do not need to set the program again.