Filter
Top Products
2
Safety precautions
The ventilation
holes at the bottom
Carpet
Do not let the machine share one receptacle with other
electric appliances. If the plugging into the receptacle
is loose, do not use the plug any more.
Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.
Keep the pin of the power plug clean, if the power plug is polluted with dust, please wipe with
dry cloth carefully.
Do not bend ,extend, twist, bind by force. Do not press or nip it with weight.
If the power cord or the power plug is bad, to avoid risk it is required to have it replaced by
the technicians of our special shop or our customer care agent.
Do not put the machine at damp place like
the bathroom. Never wash it with water. Do
not put wet laundries on the control panel.
Do not use water hotter than 50 .
In case the washing machine is installed on ground with
carpet, do not block the ventilation hole with carpet.
Pleaseplugthepowerplugonspecial
receptacle.Besuretousethree-pins
powerreceptacle.Ensurethattheearthing
prongofthepowerreceptacleisearthed
reliably.Useleakageprotectorifpossible.
Thewashing machinemust bepositionedso that
the plugisaccessible.Besuretopulltheplugoff
andclosethewaterfaucetinfollowingcases:
powerfailure,deliveringthemachine,settingthe
machineidleorcleaningthemachine.Donotplug
orpullthepowerplugwithwethand.
Disposal after washing
After using, please clean the lint and foreign materials of the lint filter etc. in time.
Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
Clean the detergent box and set it on
the control panel seat.
1.The method of dismantle: Push it up aslant and gently.
2.The method of install : install it upwards and aslant
and push it in .
The filter screen of the water inlet valve is likely to be
blocked by foreign materials and influence the water
inlet.
Please clean it with brush every two months.
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol etc.
Lint filter:
The lint filter must be used during washing.
It must be cleaned in time after each using.
Figure1
Figure2
Down
Dismantle
Install
The back cover of lint filter
Install
Dismantle
Down
Up
Up
Thefrontcoveroflintfilter
1.Pushdown thespringpiece ofthe toplint filter
tomake theclawsout ofthe filtercover,and then
pullout thelintfilter toget itdown. figure1
2.Pullthe backofthe lintfilter,and thenyou can
getdown itoffthe frontcoverof thelintfilter. figure2
3.Sweepthe rubbishinthe lintfilter.
4.Putthe backofthe lintfilter intothe frontcover .
5.Putthe lintfilterinto filtercover,and makeit
tight.
6.Makesure thelintfilter wellinstalled, orit can
influenceyour use.
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time
(about 1 hour), then close the top lid.
4.Hang up the power cord and drain hose.
3.Be sure to pull off the power plug before maintenance.
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.
T
h
inn
er
Petrol
Alcohol
Dismantle
Install