Filter
Top Products
11
Quick Quick and high-efficiency wash for common laundries
Jeans
Fibre
Cotton
Standard
Tub dry
Posthaste
Program button
Following automatic programs are available for selection
Program
Common
During common and standard programs, the washing machine can detect the laundries automatically. After detection, it will set
the water level to suitable valve automatically.
FLASH
LIGHT
FLASH
LIGHT
STANDARD
COMMON
POSTHASTE
QUICK
JEANS
FIBRE
COTTON
TUB DRY
WATER LEVEL
PROGRAM
POWER
Washing the woollen textiles
Washing the fibre textiles
Washing the relatively big and thick laundries
Washing the normal laundries
Super quick wash of the laundry under 1 kg with light soil
Applicable situation
Common washing
Drying the inner tub and the outer tub, which
can avoid growing mildew.(after washing clothes,
there is dampness between the inner tub and
the outer tub, the wall of the inner tub and out
tub can breed mildew, where you can choose the
tub dry program, Drying the inner tub and the outer
tub, keeping the inner tub and outer tub dry, which
can avoid growing mildew.
"Power" button
Push the "power" button to switch on the power.
Under power-on mode, push it to switch off the power.
Push the "power" button to switch on the power. If
the "start/pause" button is not pushed, the machine
will switch off the power automatically after 5 minutes.
Water level button
You can also set water level by yourself. After the machine is started, it will not set water level automatically. You shall push
the start/pause button to make new setting.
If there's water inside the tub, the machine cannot detect the laundries and will display water level 6 .If wet laundries are
put in, it may display water level 10 .
If posthaste program is selected, it will display water level 3 . The water level can not be adjust. When water level 1 is
reached in water filling, it will perform washing while filling water. When water level 3 is reached, it will change to normal
washing.
During operation of wash , rinse and soak program, you can push down the water level button to add water. When you
release the button, or it reaches the overflow water level, the machine will stop adding water.
The water level decided may be different from actual value because of the different moisture level of the laundries.
FUZZY