Filter
Top Products
6
BEFORE USE
3.
1.
2.
4.
ADJUSTING THE BOTTOM COVER
When open the shrink package,you will fi nd a calcium plastic board
which is laid on the top of washing machine as shown in fi g.1.The board
is used for reducing noise by pasting it under the cabinet when setting
as shown in fi g.2
It keeps out the dampness and reduces the noise.
DISMANTLE THE TRANSPORTATION BOLTS
The transportation bolts are designed for clamping anti-vibration
components inside of the washing machine during the transportation
process.
Remove the back cover.1.
Remove the three bolts on the rear side and take out the synthetic 2.
stabilisers from within the machine.
Replace the back cover.3.
Fill the holes left by the bolts with blanking plugs.4.
Note:
1.When you replace the back cover,the convexity must
face to outside, and you
have to insert the back cover from the two gaps as shown
in fi g.3.
2.Keep the transportation bolts and synthetic stabilisers in
a safe place for later use.
INSTALLATION
Adjusting the washing machine
There are adjustable feet under the bottom of the washing machine. Before use, they should be
adjusted so that the machine is level. This will minimise vibrations and thus noise during use. It will
also reduce wear and tear. We recommend using a spirit level to level the appliance.
fig.3