Filter
Top Products
19
Err7 Motor Error Contact the maintenance personnel.
Err8 Water exceeds protecƟve level. Contact the maintenance personnel.
UNb
End
1:25 The remaining Ɵme is 1 hour 25 minutes.
19:30
¬Status informaƟon: Preset Ɵme for delayed operaƟon.
Control panel lock funcƟon: Press the "Delay" and the "Start/Pause" buƩons simultaneously
for 3 seconds aŌer starƟng a program. It can no longer be changed by operaƟng buƩons or
knobs. To unlock press the "Delay" and "Start/Pause" buƩons again for 3 seconds.
Power-off memory funcƟon: In case of abrupt power failure or the need to cut off the power
during a program cycle, the present seƫngs will be saved and the preset operaƟon will
resume when the power is on again.
To cancel a program. Press the "Start/Pause" buƩon, then switch off the power and the
program is automaƟcally cancelled. Turn the program selector again to choose another
program.
During the spin process, if too much foam is inspected, in order to protect the motor, the
washing machine will eliminate the foam automaƟcally; the motor will stop and the drain
pump will drain the water conƟnuously for 90 seconds. If it happens more than 3 Ɵmes, the
motor will stop unƟl the end of cycle without spinning.
0DLQWHQDQFH
End of wash cycle.
AŌer the last rinsing cycle finishes, spinning fails completely due to unbalance of the
laundry.