Filter
Top Products
13
4
ƽ
Remove all the packing materials (including the
EPE base)to prevent vibration during use, as
shown in the right picture.Upon opening of the
package, water drops may be seen on the plastic
bag and the porthole. This is normal phenomenon
resulting from water test in the factory.
ƽ
Check attachments and materials with reference to the following
ƽ
Dismantle the packing bolts as shown in Fig. 2.
The packing bolts are designed for clamping anti-vibration components
inside of the washing machine during the transportation process.
Before use:
1. Remove the back plate;
2. Remove the three packing bolts on the back plate and take out the
rubber hose;
3. Replace the back plate;
4. Fill the holes left by the packing bolts with plastic plugs.
(Attention: The packing bolts and rubber hose should be kept in a safe
place for later use)
Fig.3
ƽ
Adjusting the washing machine
There are adjustable feet under the bottom of the w ashing machine. Before
use, the washing machine should be adjusted, a s shown in Fig. 3, so that it
is level.
Fig.2
Model
HVS1200
HVS1000
Qty
Name
Operation
manual
Quality
certificate
Water
hose
Drainage
holder
Plastic
plugs
Installation
1
11
1
1
3
4. Clean the filter Cleaning methods (once a month)
1) Pick up the bottom cover lightly (Fig. 1);
2) Screw out filter by turning counterclockwise (Fig. 2);
3) Flash clean with running water;
4) Replace the filter by turning clockwise and remount the
cover.
Caution: The filter must be in place, or it may lead to
leakage. (
Fig3
)
Fig1
Fig2
Fig3
Warrantly
card