How to use the
Bleach Dispenser
How to Use the
Soak setting
● Use this dismnser with liauid
bleach only. ~ you prefer to;se
powdered bleach, pour it into the
Filter-Flo pan or wash basket along
with your detergent. Do not put
powdered bleach into the bleach
dispenser.
● Measure bleach carefully. Here
are some recommended amounts:
LARGE WATERLEVEL—1%
CUP
(310ml) liquid
SMALL WATERLEVEL–2/3
CUP
(170ml) liquid
MINI-BASKET tub-1/4
CUP
(60 ml)
liquid
● Pour measured amount of liquid
bleach directly intobleachdispenser.
● Do not overfill or allow dispenser
to overflow. Avoidsplashing.
Undiluted bleach can cause fabric
damage.
● Never pour undiluted liquid
bleach directly onto clothes or
into the wash basket or MiN-
Basket tub.
● “SOAK” setting temperature
will automatically be cold.
s If a hot or warm soak is desired,
set the WASH/RINSE
TEMPERATURE switch to
“H~/COLD” or “W~/COL~’
and turn the Cycle SelectorKnobto
“Normal”
inthe RegularCycle. Start
the washer.After washerfillsand
begins to agitate,push in the Cycle
SelectorKnob and turn to “SOAK’
Pull out the CycleSelectorKnob to
completethe cycle.
● Foran extendedsoak alluwthe
washerto fill and agitatefor a few
minutesto dissolvethe soaking
agent. Then push in the Cycle
SelectorKnob to stopthe washer
(&p lid closed)and wow to soak
for as long as desired. After desired
soak period, pull out the Cycle
Selector Knob to completethe cycle.