GE WWA8324G Washer User Manual


 
Cati and Cleaning
usERlwimTE&cE
INSTRUCTIONS “’”’-
The tub. The porcelain is
self+leaning. Leave lid open after
washing to allow muisture to
evaporate. Do not use harsh
or gritty cleansers.
The exterior. W@eoff any spills of
washing compounds. Wipe or dust
with damp cloth. Try not to hit
surface with sharp objects.
To store washer:
JiijJ}-
with grease
or
Petroleum
Jelly.
Ask service technician to remove
The Activator@agitator. I&move
waterfkomdrainpump andhoses
at regularintervals-about 4 to 6
to preventfreezing.
months-and removeanylint that
-mav have accumulated. No tools
Do not store the washer where it
are”needed, simply grasp agitator
will be exposed to the weather.
with both hands and pull straight
For long vacations:
Be sure water supply is shut off at
faucets and drain all water from
hoses if weather will be below
fkezing.
up sharply. The slot6d section at
the top of the metal shaft has a light
coating of lubricant to prevent parts
sticking together. If this area
appears to be dry, apply alight coat
of grease or petroleum jelly around
the slotted section of the shaft
before replacing the agitator. Do
not overgrease. Excess grease may
get into clothes load.
How to remove limestone
deposits fmm clogged
Filter Flo”
pan
s Soak filter pan in a preheated
160”F.(71”C.)solution of half
vinegar and half water for 15
minutes. Then brush each side of
pan with a stiff bristle brush while
flushing with running water.
CAUTIONS:
Do not soak in porcelain
container. Vinegar can damage
porcelain.
Do not exceed 180“F.(82“C.)
or filter pan may warp.
When replacing the agitator,
carefully lower straight down onto
the shaft so that it fits into the slots.
Then apply downward pressure
until agitator snaps into its normal
position.
*
26
.