Filter
Top Products
How to operateyourclotheswasher
WARNING-To reduce the risk of fire, electric shock, or injury to persons,
read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
F
>
~
J
<
\
OFF
I
HOT WASII
SPIN
(d
● ‘o
GENERAL@ELECTRIC
\
WMM
WASH
PuL KN(M 10 START
Heavy
Duty
m
10 Slo?
I
\
J
6
Extra Large Ca~clty Washer
RINSE ~~f.
SPIN
c 9
(’
-41
v
+)
Sorting and Loading
● Sort clothes carefully by fabric
type, weight, color and amount of
soil according to instructions on
page 5.
● Add measured amount of
detergent. See pages 9 through 13
for information on detergents and
other laundry additives.
. Load clothes into the wash
basket, being carefhlnot to overload.
Clothes shouldbe belowthe retaking
ring. See page 8 for more loading
information.
For information on bleaches and
fabric softeners, see page 13.
● Close the lid. Washer will fill but
not agitate or spin with the lid open.
WashWaterTemperature
Selection
● Pull Cycle Selector Knob out to
start the cycle.
● For hot water wash, set cycle
selector to “H~ WASH”
(11min.) or “1OV
● For warm water wash, set cycle
selector to “WARM WASH”
(8 min.), “6;’ “4:’ or “2:’
● For cold water wash, set cycle
selector for warm wash as
explained above and TURN OFF
THE H(YI’WATERFAUCET.
RINSEWA~ TEMPERATURE
WILL ALWAYSBE COLD.
~ START
If you wish to change cycle setting
after washer has started, push
Cycle Selector Knob into stop
washer and reset to the new
position. Setting can be changed at
any time during the cycle.
How to soak in your washer.
Allow the washer to fill and agitate
for a fewminutes to dissolve the
soaking agent. Then push in the
Cycle Selector Knob to stop the
washer (keep lid closed) and allow
to soak for as long as desired.
After desired soak period, pull out
the Cycle Selector Knob to
complete the cycle.