Filter
Top Products
Care and Cleaning
USERMAINTENANCE
INSTRUCHONS
The tub. The porcelain is
self-cleaning. Leave lid open after
washing
to allow moisture to
evaporate.
Do not use harsh
or gritty cleansers.
The exterior. Wipe off any spills of
washing compounds. W@eor dust
with damp cloth. Try not to hit
surface with sharp objects.
Tostore washer:
Ask service technician to remove
water from drain pump and hoses
to prevent freezing.
Do not store the washer where it
will be exposed to the weather.
For long vacations:
Be sure water supply is shut off at
faucets and drain all water from
hoses if weather will be below
freezing.
Lubricate
with grease
or
Petroleum
Jelly.
The Activator” agitator. Remove
at regular intervals-about 4 to 6
months—and remove any lint that
may have accumulated. No tools
are needed, simply grasp agitator
with both hands and pull straight
up sharply. The slotted section at
the top of the metal shaft has a light
coating of lubricant to prevent parts
sticking together. If this area
appears to be dry, apply a light coat
of grease or petroleum jelly around
the slotted section of the shaft
before replacing the agitator. Do
not overgrease.
When replacing the agitator,
carefully lower straight down onto
the shaft so that it fits into the slots.
Then apply downward pressure
until agitator snaps into its normal
position.
22