GE WSM2420S Washer/Dryer User Manual


 
Polyester Knits & Permanent Press Drying Tips
DO NOT OVERLOAD—
REMOVE CLOTHES
PLACE ON HANGERS—
Garments being dried or
PROMPTLY—To help prevent
Permanent press and polyester
dewrinkled should tumble freely.
wrinkling, remove clothes from
knit garments look best if placed
the dryer promptly at the end of
on hangers after drying.
the drying cycles.
The Difference Between Automatic and Timed Drying
Automatic Drying
When using the Automatic cycles, the
Automatic
DU
Control system continually senses
the temperature of the air in the dryer drum. Wet
laundry keeps the air cool. When laundry is dry
enough (and the drum air warm enough) the heat
turns off. When the air cools, the heat turns back on.
This off and on cycling may happen a number of
times (depending on the fabric, load size and Cycle
Selector setting). The Cycle Selector advances (when
the heat is
o~
until it automatically turns off dryer.
Auto Regular. Use this cycle to dry heavy and
medium weight cotton items. The load tumbles
without heat during the last 5 minutes. This helps
make the load easier to handle.
Auto Permanent Press. Use this cycle to dry
permanent press, knits and other synthetic items. The
load tumbles without heat during the last 10 minutes.
This helps keep wrinkles from setting in and makes
the load easier to handle.
Timed Drying. When
using
the Timed Cycles, you
select the number of minutes you wish the dryer to
run and it turns off at the end of this time period. The
last 5 minutes of this cycle are without heat. This
helps make the load easier to handle.
Air Fluff cycle. The dryer does not heat when the
Cycle Control knob is set in AIR FLUFF. This cycle
can be used to fluff or air dry bedding, plastic
tablecloths, foam rubber pillows, stuffed toys,
sneakers, etc.
A
Do not dry plastic or rubber items with heat.
Use AIR FLUFF setting, or line dry. Failure
to do so could result in fire or damaged items.
Drying Selections Guide for the Automatic Cycles
Set to NORMAL Position
Set toward More Dry
Set toward Less Dry
Energy prefened automatic setting.
For loads that include
heavy-
. For
light
weight fabric loads.
For most normal loads.
weight fabrics.
If you desire to remove
If you desire to remove
less moisture.
more moisture.
For very small loads.
15