GE WSM2420S Washer/Dryer User Manual


 
Laundry
Product and
~pe
BLEACH
Chlorine liquid
such as Clorox brand
Non-chlorine such as
Clorox 2 brand
FABRIC SOFTENERS
Rinse additive such as
Downy Brand
SANITIZER
Chlorine bleach
such as Clorox brand
WATER SOFTENER
Non-precipitating
such as
Calgon
brand
Precipitating such as
Borax brand
SOAK AGENT
Such as Biz brand
PRE-TREATING, STAIN
AND SPOT REMOVERS
Such as Spray’n Wash
and
K2R
brands
TINTS AND DYES
Powdered such as
Rit
and Tin[ex brands
How to Use It
Pour diluted bleach next to the agitator.
Follow package directions.
Put bleach into washer with detergent.
Follow package directions
for diluting softeners.
Use in case of infection
and contagious disease.
See under Bleach above
Follow package directions.
Add at start of wash cycle.
F
O
11
OW
package directions.
Add at start of wash cycle.
Follow package directions.
Follow
package directions. Treat only
heavily soiled areas. Check garments’
care labels for instructions.
Follow
package directions.
NOTE: Tinted garments may
not be colorfast. Wash separately.
Special Instructions
1) Dilute bleach before
using
on any fabric. Do not pour
undiluted liquid chlorine bleach directly into washer
or on dry clothes.
2) Some of today’s washable fabrics should not be chlorine
bleached such as: silk, wool,
spandex,
or non-fast colors.
3) Check manufacturers’ care labels for special instructions.
1) May be used on most fabrics. Test fabric first.
1) Helps make clothes fluffy and soft.
2) Reduces static electricity.
3) Use the following manufacturer’s direction. Too
much may cause a hard, rough feeling on some clothes.
4) Do not pour directly on clothes.
Guards against infection by killing most bacteria and viruses.
Suspends hardness minerals in solution, keeping
water clear.
Combines with water hardness minerals to form precipitate
which gives cloudy or
milky
appearance to water.
For best results, soak garments a minimum of 30 minutes.
CAUTION: Washer control panels and finishes may
be damaged by some laundry pre-treatment soil and stain
remover products if such products are sprayed on or have
direct contact with the washer. Apply these pre-treatment
products away from washer. The fabric may then be washed
normally. Damage to your washer caused by pre-treatment
products is not covered by your warranty.
Clean washer to avoid discoloration of next load. Go
through complete cycle (5-minute wash) using hot water,
1/2 cup (120 ml) detergent,
1
cup (240 ml) bleach. Wipe
exterior parts. Caution: Tinting may discolor plastic in
washer. Subsequent washings
will
reduce discoloration
but may never eliminate it.
11
4