Filter
Top Products
Operating Instructions Safety InstructionsConsumer Support Troubleshooting Tips
8
About cycle options.
LIQUID SOFTENER
Press LIQUID SOFTENER whenever liquid fabric softener is used.
SIGNAL
Alerts you when the cycle is complete.
Press SIGNAL to select low, medium or high volume, or to turn the beeper off.
WARM RINSE
Changes the final rinse of a wash cycle from a cold to a warm rinse.
NOTE: WARM RINSE is not available when choosing a HOT wash temperature.
PRESOAK
To presoak a load and go straight into a wash cycle:
Select your wash cycle, press the PRESOAK pad, then press the START pad.
■ Each time you press PRESOAK, you will add three minutes of agitation, followed by
12 minutes of soaking, for up to an hour of additional time. After the final soak period,
the selected wash cycle begins.
■ Uses the speed and water temperature of your selected wash cycle.