Filter
Top Products
Operating Instructions Safety InstructionsConsumer Support Troubleshooting Tips
6
About Clothes Care Cycles.
QUICK RINSE
Use this feature to quickly rinse chlorine, perspiration, stains, etc. out of clothes.
■ The washer fills with water, agitates for three minutes, drains and spins. You may change
the automatic settings if desired.
SOIL LEVEL
The SOIL LEVEL setting determines the amount of agitation time.
The highest SOIL LEVEL is the Stain Wash cycle, which adds a 30 minute soak and agitation
at the beginning of the selected wash cycle.
DRAIN & SPIN
You can drain and spin any cycle at any time.
On models with a DRAIN & SPIN pad, press to drain and spin.
On models without a DRAIN & SPIN pad, press START to pause the washer, select DRAIN & SPIN
from the WASH CYCLES menu, then press START again.
CUSTOM 1 and CUSTOM 2 (on some models)
Set up your favorite combination of settings and save them here for one-touch recall.
These custom settings cannot be set while a cycle is in progress.
To store a custom combination of settings:
1. Select an EASY TOUCH setting.
2. Change LOAD SIZE, SOIL LEVEL, WASH TEMPERATURE or SPIN SPEED to fit your needs.
3. Select any OPTIONS you want.
4. Press and hold the CUSTOM 1 or CUSTOM 2 pad until the washer beeps to store
your selection.
To recall your stored combination:
Press the CUSTOM 1 or CUSTOM 2 pad, then press START.
To reprogram the custom settings:
Repeat steps 1–4 above.