GE 169234 Iron User Manual


  Open as PDF
of 15
 
9
OPERATION
Water spray
NOTE: This function can be used anytime and does not have any eect on other
settings. It canbeusedto helpironheavy fabricsordicultareas(collars,pockets,
sleeves, creases, etc). It can also be used when ironing delicate fabrics, which cannot
be steam ironed.
• Filltheironwithwater(
Filling the iron with water).
• Setthetemperature( Setting the temperature).
• Aimthespraynozzle(1) at the garment and then press the spray
button (7).
• A spray of water is emitted from the spray nozzle (1) (ill.
h
).
NOTE: The sprayfunctiononlyworkswhenwaterhasbeenlledintothereservoir(12).
Ifthesprayisbeingusedforthersttime,oriftheironhasbeenstandingforsome
time, you may need to press the spray
button (7) a few times to prime the spray
pump before it works correctly.
Steam blast
NOTE: This function provides an extra amount of steam to remove stubborn creases.
For extra stubborn creases, wait a few seconds before pressing the steam blast
button (6) again. We recommend pressing the steam blast button (6) every 2-3
seconds.
NOTE: This function only works when there is water in the water reservoir (12) and the
iron is set for steam output.
• Filltheironwithwater( Filling the iron with water).
• Setthetemperature(
Setting the temperature).
• Pressthesteam blast
button (6).
• A blast of steam is released from the nozzles in the soleplate (15) (ill.
i
).
NOTE: The iron might be too hot for some fabrics when using the steam setting.
Iron-169234-04 (GB).indd 9 5/13/10 9:15 AM
 previous next