Filter
Top Products
22
Changing the wash cycle options
1
Select the wash option you wish to modify, highlight it by touching the SELECT button.
Regular wash
START?
FAST SPINWARM BLEACH
2
Scroll to the appropriate setting and press SELECT. This will highlight your choice to show you
that it has been selected.
CHOOSE
TEMP
COLDER WARMER
WARM
3
You will then be given the option whether to save this modified option for future washes or to
just use it for this one. If you select Save for Future Washes, the washer will save the changed
wash option for that cycle only. (Please note: This option is not available for the Delay Start, Drip
Dry or Bleach selections).
4
Press SELECT to select.
5
You will then return to the main wash options screen.
6
Touch START/PAUSE or SELECT to begin the wash.
Note: If you wish to change any of the wash options while your AquaSmart™ is running please
press START/PAUSE then change the required option.
Auto Drain
Unsupervised clothes washers filled with water can present a drowning hazard to small children.
In order to minimize any risk of this type of accident, your AquaSmart™ has been
pre-programed to know when this hazard is created, and drain the wash water to a safe level.
If you pause your AquaSmart™ at any time during the wash cycle when there is water in the tub,
the washer will activate the AUTO DRAIN function after 3 minutes. This will drain the water in the
wash tub to an acceptable level, removing any potential hazard.
A warning message will be displayed to warn you prior to AUTO DRAIN being activated and the
washer will beep as it drains.