Filter
Top Products
9
8. Start Button
This button has two functions: Start / Pause.
Start:
After having selected the required programme, press
this button to start the machine; the corresponding
LED stops flashing.
If you have selected the delayed start, the machine
begins its countdown. The duration of the
programme or the delay appears on the display.
Pause:
To interrupt a programme which is running, press the
“Start” button: the corresponding LED starts to flash.
To restart the programme from the point at which it
was interrupted, press the “Start” button again
9. Programme Phase indicator
Light
By selecting the wash programme, the LED
corresponding to the various phases making up the
programme lights.
After you have started the programme, only the LED
relevant to the phase that is currently being carried
out will remain lit.
At the end of the programme the “End” LED
illuminates.
The “End” LED flashes in the event of operating
problems. And the relative alarm code appears on
the display.
E10 = the machine does not fill
E20 = the machine does not empty
E40 = the door has not been closed
To eliminate the problem, see paragraph “Something
not working”.
New_12108_14108.qxp 12/12/2005 5:41 PM Page 9