Filter
Top Products
29
12.Change door lock F over to the opposite side, insert the cable connector
and screw down the door interlock.
13.On the other side, insert the cable connector in cover G, insert cover
and allow snap-in button to lock into place.
14.Insert door and hinges into recesses on the front of the machine and
screw down.
15.Once the door has been reversed, check the function of the DOOR but-
ton.
Note regarding contact protection: The machine is only secure for
operations again once all plastic parts have been inserted.
Special accessories
The following special accessories are available from your Service Force
Centre or your specialist dealer:
Intermediate installation kits for stacked washer and
dryer:
These intermediate installation kits can be used to arrange the dryer
and an automatic AEG-Electrolux washing machine (60cm wide, front
loading) as a space-saving washer/dryer stack. The automatic washing
machine is at the bottom and the dryer is at the top.
Two versions can be supplied:
Installation kit for external condensate drain
Installation kit (125 122 510) for direct draining of condensate into a
basin, siphon, gully, etc. The condensate tank then no longer has to be
drained, it must however remain in its intended position in the ma-
chine. Refer to the “Programme options” section for how to deactivate
the EMPTY WATER display.
Max. displacement height: 1m from the base of the dryer; max. dis-
placement length: 3m
– without stacker plate 916 019 102
– with extractable stacker plate 916 019 103