Filter
Top Products
28
Door reversal instructions
1
Warning! The door may only be reversed by a specialist.
If necessary, please contact your local Service Force Centre.
Warning! Before reversing the door, disconnect the mains plug; with a
permanent connection: remove the fuse.
1.Open door.
2.Unscrew hinge A from the front of
the machine and take off the load-
ing door.
3.Carefully pry off cover plates B and
C. To do this, insert a thin screw-
driver into the slots as shown in the
illustration, press downwards
slightly and pry out the cover plates.
4.Unfasten locking block D from the
snap-on fixture, take out and rein-
sert on the other side having rotat-
ed the block through 180°.
5.Unscrew hinge A from the loading
door, rotate through 180°, reinsert
on the opposite side and screw
down.
6.Reinsert cover plates B and C on the opposite site having first rotated
them through 180°.
7.Unscrew cover plates E from the
front of the machine, rotate
through 180°, screw on the
opposite side.
8.Unscrew door lock F, push down
slightly and remove from the front
of the machine.
9.Disconnect cable connector from
door lock F.
10. Press snap-in button G in and
down, press cover down slightly
and remove from front of the ma-
chine.
11. Disconnect cable connector from
cover G.