Filter
Top Products
21
Washing cycle complete/Removing the washing
At the end of the programme PLEASE TAKE OUT THE CLOTHES appears
in the display. As soon as the
§ symbol appears, the door can be
opened.
1. Open the door using the handle.
2. Remove the washing.
3. Close the water tap.
4. Switch off the appliance.
If Rinse Hold has been selected:
1. Press the START key.
The display automatically
changes to the first pro-
gramme page. Depending
upon the programme that
has been running either SPIN
or SHORT SPIN is highlight-
ed.
If spinning or draining is required:
Use the control knob to
highlight either
– SPIN or
– DRAIN.
2. Reduce the spin speed, if
necessary. The spin speed
cannot be increased. This
protects the fabric.
3. Press the START key.
The washing is spun or the water is drained.
3 If OVERDOSING is shown in the display at the end of a wash cycle, too
much detergent was used in the completed wash programme. Please
take note of the dosage instructions provided by the detergent manu-
facturer and the amount of washing loaded the next time you wash.
DELICATES 30°C
RINSE HOLD 11:28-11:28
§
START
RINSE HOLD
######################
RINSE H.
SHORT SPIN
1200 RPM 12:28-12:34
ú
START
EASY IRON
REFRESH
1200
FASHION
SHORT SPIN)
OPTIONS SPIN
SPIN
1200 RPM 11:28-11:39
ú
START
FASHION
SHORT SPIN
1200
SPIN)
STARCH
OPTIONS DRAIN