Filter
Top Products
27
3.Remove both plastic caps sideways.
3 Special spanner A and sealing caps B
(2 units) and C (1 unit) come with
the appliance.
4.Use special spanner A to remove
screw D and the compression spring.
5.Turn sealing cap C upside down as
shown in the illustration.
6.Use sealing cap C to cap the hole.
7.Use special spanner A to remove the
two screws E.
8.Use special spanner A to remove the
four screws F.
9.Remove transit bar G.
10. Screw in the four screws F again.
11. Use sealing caps B to cap the two
large holes.
Important: Press all sealing caps B
(2 items) and C (1 item) in firmly so
that they snap into the rear wall.