Filter
Top Products
Operating Instructions
37
Remnants of detergent
are building up in the
detergent drawer.
The water tap is not fully
opened.
Turn the water tap on fully.
The inlet hose filter in the
coupling of the inlet hose at
the tap is blocked.
Close the water tap. Unscrew
the inlet hose from the water
tap and from the machine.
Clean the filter.
The rinse water is
cloudy.
The cause is probably a de-
tergent with a high silicate
content.
This has no negative effects
on rinse results; use a liquid
detergent, if necessary.
When pressing a pro-
gramme option but-
ton, the corresponding
display does not light
up.
The selected programme op-
tion cannot be combined
with the set programme.
Make another selection.
Only END is illuminated
on the control panel.
The washing machine is in
Stand-by mode.
Press any of the buttons.
Only WASH TIME is lit
on the panel and the
WASH TIME display
shows a number be-
tween 1 and 19.
Delay Start Timer is running,
and the washing machine is
in Stand-by mode.
Press any of the buttons to
cancel Stand-by mode.
The Programme
Progress Display is
flashing continuously.
Programme Protection is
switched on; the programme
selector has been moved
during the washing cycle.
Turn the programme selec-
tor back to the original posi-
tion (see “Programme
Protection”).
Problem Possible Cause Remedy